Ridgid R250AF18 Owners Manual - Page 8

FEATURES PRODUCT SPECIFICATIONS Motor...18 Volt DC Fastener Type...15 gauge DA type 34 degree finish nails Fastener Range...1-1/4 in. to 2-1/2 in. Magazine Capacity...100 nails Fastener Driving Speed...3 fasteners per second Weight...6.8 lbs. KNOW YOUR finish nailer See Figure 1, page 14. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. ANGLED MAGAZINE The angled magazine allows access to tighter areas, and its rear-loading design offers quick two-step reloading of fasteners. BELT HOOK The hook mounts on either side of the tool and can be used to hang the tool from a belt when not in use. DEPTH OF DRIVE ADJUSTMENT The tool-free depth of drive adjustment lets the operator select precise driving depth of the fastener. JAM RELEASE A tool-free jam release is provided for ease in clearing infrequent jams. LED LIGHT The LED light located on the front of the tool illuminates when the LED button is depressed. The LED will stay illuminated until either the button is depressed again or the tool has been inactive for 15 minutes. NO-MAR PAD The no-mar pad prevents marring and denting when using the tool on softer woods. OVERMOLD GRIP AND TRIGGER The overmold grip and trigger offer increased comfort and control of the tool. trigger mode selector The trigger mode selector lets the operator choose between Contact Actuation for higher productivity and Single Sequential Actuation for precise fastener placement. ASSEMBLY UNPACKING This product has been shipped completely assembled.  Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.  If any parts are damaged or missing, please call 1-866-539-1710 for assistance. PACKING LIST Angled Finish Nailer Battery Pack Charger Tool Bag Operator's Manual WARNING: If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. 8 - English