Ridgid R8611501K Owners Manual - Page 6
Features, Assembly
View all Ridgid R8611501K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FEATURES PRODUCT SPECIFICATIONS Chuck 1/2 in. Keyless Motor 18 Volt DC Switch Variable Speed (VSR) No Load Speed 0-450/0-1,600 r/min. (RPM) Blows per minute 0-7,200/0-25,600 IPM Clutch 24 Position Torque 615 in.lb. * Impacts per minute KNOW YOUR HAMMER DRILL See Figure 1, page 13. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. AUXILIARY HANDLE ASSEMBLY Your drill is equipped with an auxiliary handle assembly that can be installed in different positions. BIT STORAGE A bit provided with the drill can be placed in the storage area, located on the base of the drill. DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK) Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. IMPACT SPEED This tool features an impact speed of 0-7,200 BPM (Blows Per Minute) in LO (1) speed and 0-25,600 BPM in HI (2) speed. KEYLESS CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws. LED GRIP LIGHT The LED light, located on the front of the tool base, illuminates when either the switch trigger or grip light switch is depressed. MODE SELECTOR With the mode selector, you can select drill, drive, or hammer mode. TORQUE ADJUSTMENT RING Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application. TWO-SPEED GEAR TRAIN The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or HI (2) speed. VARIABLE SPEED The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. ASSEMBLY UNPACKING This product has been shipped completely assembled. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call 1-866-539-1710 for assistance. PACKING LIST Hammer Drill Auxiliary Handle Assembly Double-ended Bit Tool Bag Operator's Manual 6 - English