Rocketfish RF-700WPS User Manual (English) - Page 4
Installing your power supply - manual
View all Rocketfish RF-700WPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
• FAN speed auto-controlled by a thermal sensor inside the power supply • 100% Hi-pot and burn-in tested • Supports 12-16 SCSI hard drives • Components include: Output cables 5.9 inches (150.0 mm) 5.5inches (140.0 mm) Fan 4.7 inches 12 cm 3.4 inches (86.0 mm) AC socket Power switch Installing your power supply To make sure you connect your power supply correctly, check your motherboard and graphics card manuals for compatibility before connecting RF-700WPS to any of your devices. To install your power supply: 1 Check your local AC voltage before installation (115 VAC voltage is for USA, Japan, and so on, and 230 VAC voltage is for Europe, South East Asia, and many other countries). Caution: Be sure to connect the PSU (Power Supply Unit) to local input AC voltage only. Setting the incorrect voltage can damage the power supply and connected equipment, and may void your warranty. The RF-700WPS is compatible with 115VAC and 230VAC input voltage. 2 Turn off your computer, then unplug the power cord from your old power supply. 3 Open your computer case following the directions provided in your case manual. 4