Rocketfish RF-700WPS2 User Manual (English) - Page 6
Troubleshooting - power supply
UPC - 600603116476
View all Rocketfish RF-700WPS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• The 6-pin +12V power connector(s) to the PCI-E graphic card(s). 6 Close your computer case. 7 Connect the power cord to the power supply. 8 Switch the I/O switch to I. 9 Turn on your computer. Troubleshooting If the power supply fails to function correctly, check the following: • Make sure that the power cord is plugged into a powered electrical outlet. • Make sure that the power cord is plugged into the power supply. • Make sure that the I/O switch is in the I position. • Make sure that all power connectors are connected to the motherboard and devices correctly. 6
6
•
The 6-pin +12V power connector(s) to the PCI-E graphic card(s).
6
Close your computer case.
7
Connect the power cord to the power supply.
8
Switch the I/O switch to
I
.
9
Turn on your computer.
Troubleshooting
If the power supply fails to function correctly, check the following:
•
Make sure that the power cord is plugged into a powered electrical
outlet.
•
Make sure that the power cord is plugged into the power supply.
•
Make sure that the I/O switch is in the
I
position.
•
Make sure that all power connectors are connected to the motherboard
and devices correctly.