Rocketfish RF-BPRACDC2 User Manual (English) - Page 6

RF-BPRACDC2 09-0392_ENG.fm Page 6 Tuesday, May 19, 2009 3:24 PM To use the AC/DC combo power adapter with a wall socket: 1 Locate the specified tip from the tip bundle provided. Each tip is clearly numbered. 2 Connect the selected tip to the end of the output cable, making sure that the pins on the tip are aligned with the holes in the cable. The ridge on the inside of the tip should align with the groove in the output cable connector. Also make sure that the tip is pushed all the way into the output cable's connector. 3 Plug the power tip into your notebook computer. 4 Connect the AC wall socket input cable to the adapter. 5 Plug the AC connector into the wall socket or power strip. When the adapter has power, the status light turns on. Your device is now powered and the battery is charging. Using the AC/DC combo power adapter in a vehicle. The AC/DC combo power adapter auto connector can be used in any vehicle with a 12-volt DC cigarette lighter socket such as a car, truck, RV, or boat. CAUTION: To prevent power interruption and any negative effects on your mobile device, disconnect the power adapter prior to starting your vehicle's engine. The power adapter may be re-connected once the vehicle's engine has been started. To use the AC/DC combo power adapter in a vehicle: 1 Locate the specified tip from the tip bundle provided. Each tip is clearly numbered. 6