Rocketfish RF-BTR315 Quick Setup Guide (English) - Page 1

Wirelessly stream music from your iPhone, iPad, or other Bluetooth-enabled device to your home stereo or other audio device. Package contents • Bluetooth Music Receiver • AC/DC adapter • Quick Setup Guide • 6 ft. 3.5 mm stereo audio cable • 3.5 mm jack to RCA stereo audio plug adapter Features • aptX® audio decoding: The highest Bluetooth stereo audio quality possible • Supports Near Field Communication (NFC) for easy connection with compatible Bluetooth devices • Optical digital audio output: The highest quality audio connection to your home stereo • Analog stereo audio output: Easily connect to amplified speakers or any device with an audio input jack • Wireless range up to 33 feet (10 m) • Wall mount feature • Remembers up to eight Bluetooth devices Note: Music can be played from only one device at a time. NFC logo LED indicator • Lights blue when paired and connected to your Bluetooth device. • Blinks blue when not connected to your Bluetooth device or in pairing mode. • Turns off when the receiver is turned off. Before using your new product, please read these instructions to prevent any damage. QUICK SETUP GUIDE RF-BTR315 Bluetooth Music Receiver Setting up your Bluetooth Music Receiver Connecting to an output device 6 ft 3.5 mm stereo audio cable Optical digital audio cable (not included) OR 3.5 mm jack to RCA stereo audio plug adapter Audio device (such as an audio receiver) You can choose either analog (good) or digital (best) cables to connect your Bluetooth Music Receiver, depending on the connections available on your home stereo system. Digital connection Using an optical digital audio cable (not included), connect your home stereo system to the OPTICAL jack on your Bluetooth Music Receiver. OR Analog connection Using the included 3.5 mm stereo audio cable, connect your home stereo system or other component to the AUDIO OUT jack on your Bluetooth Music Receiver. Note: If your home stereo system does not have a 3.5 mm Audio In connector, use the included 3.5 mm jack to RCA stereo audio plug adapter. Connecting power: 1 Plug the AC/DC adapter into the DC 5V jack on your Bluetooth Music Receiver. 2 Plug the AC/DC adapter into a wall power outlet and slide the power switch to ON. The LED indicator begins to blink blue to indicate that the unit is on and ready to be paired to your Bluetooth devices. Pairing your devices Before you can use your Bluetooth Music Receiver with a Bluetooth device, you need to pair the two. Your Bluetooth Music Receiver can connect to a Bluetooth-enabled device using the Bluetooth settings on your device or by touching your Bluetooth device to the Bluetooth Music Receiver using NFC. To pair your devices using Bluetooth settings: 1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on and within 33 feet (10 meters) of your Bluetooth Music Receiver. 2 Turn on your Bluetooth Music Receiver by plugging in the AC/DC adapter and sliding the power switch to ON. The LED indicator blinks on and off slowly. Your Bluetooth Music Receiver is in pairing mode. 3 Turn on Bluetooth on your Bluetooth device, then set it to pairing mode. For more information, see the documentation that came with your Bluetooth device. 4 On the Bluetooth device, select Music Receiver in the list of found devices. 5 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue on the Bluetooth Music Receiver. 6 If you are pairing with a computer, make sure that your Bluetooth Music Receiver is selected as the computer's default playback device. See the computer's documentation for instructions. To pair your devices using NFC Fast connection: Note: Check your Bluetooth device to see if it is compatible with NFC. If it is not, use the steps for pairing your device using Bluetooth settings. 1 Turn on your Bluetooth Music Receiver by plugging in the AC/DC adapter and sliding the power switch to ON. The LED indicator blinks on and off slowly. Your Bluetooth Music Receiver is in pairing mode. 2 Turn on Bluetooth on your Bluetooth device. 3 Turn on the NFC function (see documentation that came with your NFC-enabled device). 4 Touch your Smartphone or tablet to the NFC logo ( ) on the top of your Bluetooth Music Receiver, to pair with your Bluetooth Music Receiver. The LED indicator on the Bluetooth Music Receiver lights blue. 5 When your Smartphone or tablet tells you that the Bluetooth Music Receiver is connected, you can begin playback. 6 To disconnect, touch your Smartphone or tablet to your Bluetooth Music Receiver again (see documentation that came with your NFC-enabled device). General Pairing Notes: • Some devices, such as an iPhone, connect immediately after pairing so the LED on the Bluetooth Music Receiver remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this instance, the LED continues to blink until a connection is established. • Your Bluetooth Music Receiver saves pairing information for up to eight devices. However, it can only be connected to and play content from one device at a time. • When you turn on your Bluetooth Music Receiver, it automatically connects to the last connected device if that device is in range. To connect to a different paired device, you have to turn off Bluetooth or unpair from the currently paired device and manually connect to the other paired one. • The auto connect feature may not work with some Bluetooth devices. If this occurs, use your Bluetooth device settings menu to manually select the Music Receiver from the list of found Bluetooth devices.