Rocketfish RF-G1502 User Manual - Page 11

TV WALL MOUNT RF-TVMLPT01V2 STEP 4 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV requires, test various sizes by hand threading the screws. Select one of the following types of screws: M4 × 12 mm screws (B) - For flat back TVs M4 × 35 mm screws (C)- For TVs with irregular or obstructed backs Select M4 washers (D). For an irregular or obstructed TV back, use the Universal spacers (E) CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount. Screw fits correctly Screw is too long Screw is too short 2 Remove the screws. 3 For a flat back TV, go to "STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back" on page 12. -ORFor an obstructed back, go to "STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs" on page 13. Need help? Call 1-800-620-2790 (U.S. and Canada) 11