Rocketfish RF-HTS205 Quick Setup Guide (English) - Page 1
Rocketfish RF-HTS205 Manual
View all Rocketfish RF-HTS205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
7-outlet Power Manager RF-HTS205 QUICK SETUP GUIDE Congratulations on your purchase of this Rocketfish Power Manager with surge protection and noise filtering. Your power manager: • Reduces energy consumption to save environmental resources and lower your electric bill • Provides surge protection for sensitive electronic devices • Incorporates noise filtering to provide clean power that will maximize the performance of your devices Features 1 Energy Savings (ES) Switch - Turn this switch ON to enable Energy Savings (the master-controlled outlets are shut down when the the device plugged into the master outlet is turned off.) When this switch is OFF all outlets are always-on. 2 One master outlet - controls power to the four master-controlled outlets. 3 Four master-controlled outlets - When the Energy Savings Switch is ON, these outlets automatically shut down to conserve energy when the device plugged into the master outlet is turned off. When the Energy Savings Switch is OFF, these outlets are always-on. 4 Two always-on outlets - provide continuous power regardless of Master/Master-controlled outlets state. 5 Main power switch/circuit breaker - controls power to all AC outlets on the Power Manager, and allows the unit to be reset in the event of a circuit overload (after the overload condition has been resolved). 6 Grounded LED indicator - lights when a properly grounded AC outlet is detected. If this LED does not light, we recommend that you contact a certified, licensed electrician to inspect your wiring. 7 Protected LED indicator - lights when the surge protection feature is working properly. If this LED does not light or goes out, the surge protection feature has reached full capacity and can no longer absorb additional surges and spikes. The power manager should be replaced if this light goes out. 8 5 ft (1.5 m) Soft-Flex™ power cord with right-angle/off-set plug - enables placement of the Power Manager in the desired location. The right-angle plug allows you to place furniture as close as possible to the wall and not block the second AC outlet.