Rocketfish RF-HTS210 Quick Setup Guide (English) - Page 2
Operating instructions, Safety precautions, One-year limited product warranty - surge protector
![]() |
View all Rocketfish RF-HTS210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
9 Grounded LED indicator - lights when a properly grounded AC outlet is detected. If this LED does not light, we recommend that you contact a certified, licensed electrician to inspect your wiring. 10 Energy Savings (ES) Switch - Turn this switch ON to enable Energy Savings (the master-controlled outlets are shut down when the the device plugged into the master outlet is turned off.) When this switch is OFF all outlets are always-on. 11 Coaxial cable surge protection - protects your incoming coaxial cable line from surges and spikes. Additional features • 3,150 joules surge protection - protects your equipment from damaging power surges and spikes. • 58 dB EMI/RFI noise filtering - ensures that your equipment receives only clean power for maximum performance. • Audible alarm - sounds when the surge protection feature has reached full capacity and can no longer absorb surges and spikes. The power manager should be replaced if this alarm sounds. • Power cord labels - attach these labels to your power cords (near the plug end) to help identify which cord is attached to which device in the event that one should need to be unplugged for any reason. The labels are pre-printed for convenience, and the blank labels can be customized for unique devices. Operating instructions 1 Plug your power manager's power cord into a standard 120V AC outlet. If the LEDs do not light, press the main power switch/circuit breaker on the front of your power manager. 2 Plug your primary home theater device, such as a TV, into the Master outlet on your power manager. When you turn off this device or it goes into sleep or standby mode, the devices plugged into the Master-controlled outlets automatically shut off to save power. Note: This feature is enabled when the Energy Saving (ES) Switch is in the ON position. If you want all outlets to be always-on, set this switch to the OFF position. 3 Plug secondary devices, such as a Blu-ray or DVD player, A/V receiver, or CD player into the Master-controlled outlets on your power manager Note: Do not plug devices that you may want to use when the device plugged into the Master outlet is turned off because these devices will not receive power. 4 Plug devices that need constant power, such as a DVR/PVR or devices you want to use when the device plugged into the Master outlet is turned off, into the Always-on outlets. 5 Connect the incoming coaxial cable source (such as the cable jack on the wall or incoming satellite line) to the coaxial jack marked IN on the Power Manager. 6 Connect another coaxial cable to the cable OUT jack on your power manager and to the cable IN jack on the TV (when not using a cable or satellite box) or to the cable IN jack on the cable or satellite or TV (if you do not have a cable/satellite box). 7 After all devices have been properly plugged into the Power Manager and powered on, when you power the primary device that is plugged into the Master outlet on and off, the secondary devices that are plugged into the Master-controlled outlets will automatically power on and off. Devices that are plugged into the Always-on outlets will not be controlled by the primary device, and must be powered on and off separately as desired. Note: Should the Master-controlled outlets not power on and off as described when the primary device plugged into the Master outlet is powered on and off, it is possible that the primary device draws too much current while in the OFF or STANDBY mode. In the event this should occur with your equipment, try plugging a different primary device into the Master outlet. Specifications • Load rating: 15 amps • Line voltage: 125V AC @ 60 Hz • Surge protection: 3 lines (L-N / L-G / N-G) • Maximum surge current: 165,000 amps • Maximum energy dissipation: 3,150 joules • Clamping voltage: L-N / L-G / N-G = 400 volts • EMI/RFI noise filtering: Up to 58 dB • Standby power consumption: 0.99 watts • UL-1449 certified Safety precautions • RISK OF ELECTRIC SHOCK-Use only in dry locations and only indoors. • DO NOT plug into another relocatable power tap. • DO NOT daisy chain surge protectors. • DO NOT use with any aquarium equipment. • DO NOT use if correctly grounded outlets are not available. • DO NOT install this device if there is not at least 30 feet (10 meters) or more of wire between the electrical outlet and electrical service panel. One-year limited product warranty See included warranty sheet, visit www.rocketfishproducts.com, or call 800-620-2790 for additional connected equipment and product warranty information or for customer service. © 2012 BBY Solutions, Inc., All Rights Reserved. Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners. ENGLISH 12-0770
![](/manual_guide/products/rocketfish-rfhts210-quick-setup-guide-english-0817706/2.png)