Rocketfish RF-PCC132 Quick Setup Guide (English) - Page 1

USB to Ethernet Adapter | QUICK SETUP GUIDE RF-PCC132 Thank you for purchasing this high quality Rocketfish USB to Ethernet Adapter. Use this adapter to instantly connect to a 10/100 Mbps network from the USB port on your desktop or laptop computer. Package contents • USB to Ethernet Adapter • Driver CD • Quick Setup Guide 3 When the installation is complete, click Finish to restart your computer and finish the installation. Setting up the adapter Note: The driver software must be installed before you connect the adapter. The adapter does not need to be connected for the software to install. To install on a Windows PC: 1 Insert the driver CD into the optical drive on your computer. The software should run automatically. The initial installation screen opens. Note: If the software does not run automatically, locate and double-click Run.exe on the driver CD. 2 Click on your operating system, then follow on-screen instructions. 4 Connect the USB connector on the adapter to an open USB port on your desktop or laptop computer. 5 Connect a network cable to the Ethernet port on the adapter. To install on a Mac: 1 Insert the driver CD into the optical drive of your computer. On the driver CD, locate and click AX88772.dmg. Click the DISK IMAGE icon. The driver setup driver setup dialog box opens. Note: If the computer has Windows 8, you do not need to install the driver from the disc. The drivers are installed automatically.