Rocketfish RF-SBM102 User Guide - Page 11

RF-SBM102 STEP 6 - Install the soundbar mount on your TV CAUTION: To offset the shift in height of your TV bracket caused by the soundbar bracket (01), you must use the spacers (16) in the top hole locations and the washers (17) in the bottom hole locations. 1 If your TV has a flat back, place the 16mm spacers (16) over your TV's top mounting holes and the interface washers (17) over the bottom mounting holes. TV with a flat back OR If your TV has an irregular or obstructed back, place your TV mount spacers over your TV's mounting holes. Then place the 16 mm spacers (16) over the spacers on the top mounting holes and the interface washers (17) over the spacer on the bottom mounting holes. TV with an irregular or obstructed back TV mount spacers TV mount spacers You'll need One type of the following screws (4) 16 16 mm spacer (2) 05 M4 × 30 mm screw (4) 06 M4 × 50 mm screw (4) 07 M6 × 30 mm 08 M6 × 50 mm screw (4) screw (4) 17 Interface washer (2) 10 M8 × 40 mm 09 M8 × 30 mm screw (4) screw (4) 11 M8 × 50 mm screw (4) 12 M8 × 65 mm screw (4) One type of the following washers (4) 13 M4 washer 14 M8/M6 (4) washer (4) Phillips screwdriver 11