Rocketfish RF-WR536 User Manual - Page 10
Switching between the headset and phone, Erasing all pairing information
View all Rocketfish RF-WR536 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Switching between the headset and phone • While a call is in progress, double-press the power/send/end button or use the switching function on the phone. Erasing all pairing information To erase all pairing information: 1 Turn off the headset. 2 At the same time, press and hold the power/send/end and volume up buttons until the indicator flashes. After erasing all pairing information, the headset enters pairing mode automatically. Turning the indicator on or off You can turn the indicator on or off when the headset is connected to a phone or during a call. To turn the indicator on or off: • At the same time, press the power/send/end button and the volume up button for about four seconds. The indicator turns off. Repeat this step to turn the indicator back on. Checking the battery status When the headset is paired and connected to a phone, press and hold the power/send/end button for about two seconds. • If the indicator flashes once yellow-green, the battery level is over half of battery capacity. • If the indicator flashes once yellow-green and red, the battery level is less than half, but has more than one hour of talk time. • If the indicator flashes once red, the battery level has less than one hour talk time. Resetting the headset To reset the headset: • Connect the charger. The headset is turned off and reset. Note: You should only use the reset function when the headset operates unusually. When you reset the headset, pairing information is not erased. 10 RF-QX3 Wireless Bluetooth Headset