Ryobi ELL1500 User Manual - Page 4
Operation, Assembly
View all Ryobi ELL1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the following purpose: Light-duty vacuuming of dry surfaces INSTALLING/REMOVING BATTERY PACK See Figure 1, page 6. Place the battery pack in the hand vac. Align the raised rib on the battery pack with groove in hand vac's battery port. Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the hand vac before beginning operation. Locate the latches on the side of the battery pack and depress both sides to release the battery pack from the hand vac. STARTING/STOPPING THE VACUUM See Figure 2, page 6. To start the vacuum: slide the switch toward the front of the vacuum. To stop the vacuum: slide the switch toward the back of the vacuum. BRUSH/CREVICE ATTACHMENT See Figures 3 - 5, page 6. The combination brush/crevice attachment is stored on the underside of the dust bowl. To detach the brush/crevice attachment, pull it forward and remove it from the dust bowl. The cover of the brush/crevice attachment slides forward to cover the brush so the attachment can be used as a crevice tool. Turn off the vacuum. Remove the battery pack. Insert the attachment into the front end of the vacuum dust bowl, making sure the attachment is firmly pushed into place. When purchasing replacement brush/crevice attachment, request recommended part number 019484002007. REMOVING/REATTACHING THE DUST BOWL See Figure 6, page 6. The dust bowl should be checked, emptied, and cleaned periodically for maximum dust collection. To remove: Remove the battery pack. Depress the release button located on top of the hand vac. Pull the dust bowl down and out. To reattach: Position the two sections as shown. Align the slot on the bottom of dust bowl with the tab on the bottom of motor housing, then snap the two sections together. 4 - English