Ryobi GD201 Operation Manual 2 - Page 1
Ryobi GD201 Manual
View all Ryobi GD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Fig. 1 A ADDENDUM FOR RYOBI GARAGE DOOR OPENER B WARNING: This addendum is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user must read and understand operator's manual before installing or using this product. All page references refer to the operator's manual. A - Plastic Bag (sac en plastique , saco plástico) B - Felt Washer (rondelle en feutre, arandela de fieltro) NOTE: Install felt washer onto the drive shaft of the RYOBI garage door opener prior to assembling the sprocket and the rails as described on page 18 of the operator's manual. Fig. 2 INSTALLING THE FELT WASHER B A See Figures 1 - 2. When installed correctly, the felt washer can prolong the life of the motor. To install: Place the power head on a towel or the packaging material with the light cover facing down. Do not place the unit directly on hard surfaces as this may damage the light cover and motion sensor. C Remove the felt washer from the plastic bag. NOTE: The felt washer has been premixed with sufficient lubricant. No additional lubricant is required. Do not attempt to dry or "clean" the felt washer. Slide the felt washer down the motor shaft and onto the base of the power head. 991000982 1-6-17 (REV:04) A - Felt Washer (rondelle en feutre, arandela de fieltro) B - Shaft (arbre, eje) C - Power Head (bloc moteur, cabezal motor)