Ryobi HG600 Operation Manual - Page 7

FEATURES PRODUCT SPECIFICATIONS Heat Output...200˚F-1050˚F Input...120 V, AC only, 60 Hz, 11 Amps Net Weight...1.7 lbs. KNOW YOUR HEAT GUN See Figure 1, page 11. Before attempting to use this product, familiarize yourself with all operating features and safety rules. HI/LO/OFF SWITCH Your heat gun has a conveniently located on/off slide switch. NOSE CONE The nose cone on your heat gun can be removed for work in confined spaces. SUPPORT STAND Your heat gun has a built-in support stand for ease of use and convenient cool down. TEMPERATURE ADJUSTMENT DIAL The temperature of your heat gun can be adjusted from 200ºF to 1050ºF by rotating the temperature adjustment dial. TEMPERATURE DISPLAY The desired temperature is indicated by the position of the temperature adjustment dial. THERMAL PROTECTION The heat gun is equipped with thermal protection that deactivates the heating coil when the nozzle is too close to a surface being heated. The fan will continue to operate and the heating coil will automatically activate after the coil has cooled down. ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Heat Gun Tube Bender Nozzle Concentrator Nozzle Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. 7 - English