Ryobi P1111 Operation Manual 1 - Page 1
Ryobi P1111 Manual
View all Ryobi P1111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HANDLE ASSEMBLY INSTRUCTIONS For 16 in. Lawn Mower See Figures 1 - 3. After raising the lower handle as described on page 8 of the operator's manual, you will need to install the upper handle. WARNING: To prevent accidental starting, do not make any adjustments or installations with the start key or battery pack inserted. Accidental starting of the mower during assembly could result in serious personal injury. To install: Align the hole on the upper handle (A) with the hole in the lower (B) handle as shown. NOTICE: Do not allow the starter cable to become pinched or trapped when aligning the handles. Insert threaded end of handle lock (C) through both handles with the threaded end facing inside. Install the washer and handle knob (D) and tighten to secure. Repeat on the opposite side. Close the handle locks (E) to secure the upper handle in place. NOTE: If the upper handle is loose or separated from the lower handle, tighten the knobs (F) on the handle locks by turning them clockwise. SAVE THESE INSTRUCTIONS TECHTRONIC INDUSTRIES NORTH AMERICA, INC. 1428 Pearman Dairy Road Anderson, SC 29625 USA 1-800-860-4050 www.ryobitools.com B A C D D Fig. 1 1 C Fig. 2 E F E F 991000772 9-24-15 (REV:01) Fig. 3