Ryobi P131 English Manual - Page 6
Operation, Assembly - in vehicle charger
View all Ryobi P131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the charger and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the charger carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST In-Vehicle Charger Operator's Manual WARNING: If any parts are missing or damaged do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. APPLICATIONS You may use this charger for the following purposes: Portable charging of Ryobi 7.2 Volt-18.0 Volt batteries. CAUTION: If at any point during the charging process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery. Return the charger and battery to your nearest service center for service or replacement. LED FUNCTIONS OF CHARGER LED WILL BE ON TO INDICATE STATUS OF CHARGER AND BATTERY PACK: See Figure 2. Red Power LED on = Charger is getting power from cigarette lighter receptacle or powerpoint. Red LED on = Quick charging mode. Green LED flashing = Charging Green LED on = Fully charged and in maintenance charge mode. Red LED flashing = When battery pack is inserted into charger, indicates hot battery pack or that battery pack is out of normal temperature range or is evaluating. Yellow LED on and Red LED flashing = Deeply discharged or defective battery pack. Yellow LED flashing = This is a High and Low input voltage shutdown. If the cigarette adapter plug voltage is above 15Vdc or below 10Vdc the charger will stop charging. If input voltage is between 10.5Vdc and 10Vdc, the yellow LED will flash and alarm will sound. NOTE: There is a low input voltage audible alarm for less than 10.5V DC input. The yellow LED will flash. You should start your car to recharge the vehicle battery and/or remove the charger adapter plug to stop the charging before the car battery is completely drained. No LED on = Defective charger or battery pack.