Ryobi P237 User Manual - Page 4
Vsymbols Wfeatures - with battery
View all Ryobi P237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Always wear eye protection with side shields marked to comply with ANSI Z87.1. Wet Conditions Alert Do not expose to rain or use in damp locations. Li - Ion V Hz W Recycle Symbols Volts Hertz Watt Alternating Current Direct Current This product uses lithium-ion or nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. Voltage Frequency (cycles per second) Power Type of current Type or a characteristic of current FEATURES PRODUCT SPECIFICATIONS Battery Pack Voltage...18 V DC Charger Input...120 V, AC only, 60 Hz KNOW YOUR charger See Figure 1, page 8. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BATTERY PROTECTION FEATURES Ryobi One+ 18 V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life. DIAGNOSTIC FEEDBACK LEDs provide feedback to indicate whether the battery pack is charging, fully charged, or defective. DUAL CHEMISTRY The battery charger can charge either lithium-ion or nickelcadmium batteries. KEY HOLE HANGER The charger has a key hole hanging feature for convenient, space saving storage. Screws should be installed so that the center distance is 4-1/8 in. 4 - English