Ryobi P2750 Operation Manual - Page 7

FEATURES PRODUCT SPECIFICATIONS Motor 18 V DC Width Capacity 8 in. Depth Capacity 4 in. Speed Low 0-200/min (RPM) Medium 0-250/min (RPM) High 0-300/min (RPM) KNOW YOUR CULTIVATOR See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. KEYHOLE HANGER Built in hanger allows you to easily and conveniently store the unit safely out of the way. LOCK-OUT BUTTON The lock-out button prevents accidental starting. REAR HANDLE WITH OVERMOLD The rear handle with overmold provides added user comfort. VARIABLE SPEED LEVER The variable speed lever, located on top of the rear handle, allows the cultivator to operate at different speeds. The maximum speed can be adjusted before or during operation. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Cultivator (Lower and Upper End) Front Handle Assembly Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts. TOOLS NEEDED See Figure 2. The following tool (not included or drawn to scale) is needed for assembly: n Phillips Screwdriver 5 - English