Ryobi P290 Operation Manual - Page 7
Maintenance Information, Begins On After, French And, Spanish Language S.,
View all Ryobi P290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
OPERATION DRIVING OR REMOVING SCREWS See Figures 5 - 6, page 9. WARNING: Do not drive a screw where there is likely to be hidden wiring behind the surface. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. If you must drive a screw where hidden wire could be present, always hold tool by insulated gripping surfaces (handle) when performing the operation to prevent a shock to the operator. NOTICE: The impact driver is not designed to be used as a drill. Place the direction of rotation selector in the correct position for operation. Hold the impact driver with one hand. Place the bit on the screw head and slowly depress the switch trigger. Start the bit slowly for more control. NOTE: The Tri-Beam LED will illuminate as the trigger is depressed. As the screw is driven, impacting will begin. NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 8, AFTER FRENCH AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS BEGIN ON PAGE 9. 7 - English