Ryobi P3340 Operation Manual - Page 6

ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. All items listed in the Includes section must be included at the time of purchase. WARNING: Items in this Assembly section are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. INSTALLING THE FAN HEAD ONTO THE FRAME See Figure 1, page 8. NOTE: Do not operate the fan or connect the power cord or battery pack without first installing the fan head onto the frame.  Align the upper tubes on the fan head with the lower tubes on the frame as shown. The spring-loaded locking pins should be aligned with the holes in the lower tube.  Push the fan head and frame together until the locking pins click into place in the holes. OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Hybrid tools are always in operating condition. Therefore, switch should always be in the OFF ( 0 ) position when not in use. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: Always remove battery pack or unplug extension cord from your product when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack or unplugging extension cord will prevent accidental starting that could cause serious personal injury. APPLICATIONS You may use this tool for the purpose listed below:  General ventilation of most household spaces NOTICE: This product is designed to be powered by either a RYOBI™ ONE+™ 18V battery pack (DC mode) or by electric power (AC mode). Either power source can be used by installing an approved battery pack or power cord into the product as described in this manual. INSTALLING/REMOVING BATTERY PACK See Figure 2, page 9.  Place the speed switch in the OFF ( 0 ) position.  Insert the battery pack into the product as shown.  Make sure the latches on each side of the battery pack snap into place and the battery pack is secured before beginning operation.  Depress the latches to remove the battery pack. For complete charging instructions, see the operator's manuals for your battery pack and charger. 6 - English