Ryobi P3650B User Manual - Page 5

FEATURES PRODUCT SPECIFICATIONS Stroke Length...1-1/8 in. No Load Speed...0-2,900 SPM ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below:  Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood)  Cutting masonite and plastic  Cutting drywall  Cutting metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper INSTALLING/REMOVING BATTERY PACK See Figure 1, page 8. To install:  Lock the switch trigger by sliding the lock-off button into the locked position.  Insert the battery pack into the product as shown.  Make sure the latches on each side of the battery pack snap into place and the battery pack is secured before beginning operation. To remove:  Lock the switch trigger by sliding the lock-off button into the locked position.  Depress the latches on each side of the battery pack and remove the battery pack from the tool. For complete charging instructions, see the operator's manual for your battery pack and charger. 5 - English