Ryobi P400 English Manual - Page 14
Changing Sanding Sheets And Pads, Rotating The Sanding Sheets
View all Ryobi P400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
OPERATION CHANGING SANDING SHEETS AND PADS See Figure 8. The sander is packed with sanding sheets and scrubbing pads designed for a variety of uses. To change sheets and pads, simply pull the used sheet off the base and attach the desired sheet by pressing the sheet or pad onto the base of the sander. ROTATING THE SANDING SHEETS See Figure 9. The majority of wear in a precision sanding application occurs at the tip of the sanding sheet. The unique Tri-Flex design of the sanding sheets allows you to detach and rotate the top two thirds of each and extend the life of the sheet. To rotate the top of the sheet, simply remove the top two thirds along the perforation. Rotate the sheet so that a clean corner is located at the tip of the base. Press the sheet firmly onto the pad. NOTE: Scrubbing and polishing pads are not perforated and cannot be rotated. HOOK-AND-LOOP PAD SANDING SHEET ROTATING SANDING SHEET Fig. 8 Fig. 9 14