Ryobi P4002 Operation Manual 2

Ryobi P4002 Manual

Ryobi P4002 manual content summary:

  • Ryobi P4002 | Operation Manual 2 - Page 1
    the operator's manual for the P4002 RYOBI™ drain auger. Ensure compatibility and fit before using this accessory. Do not use this accessory if a part is damaged or missing. INSTALLING AUGER TIPS See Figures 1 - 2.  Remove the battery pack or power cord from the tool.  Hold the cable and pull the
  • Ryobi P4002 | Operation Manual 2 - Page 2
    manual del operador como el de Sistema de apertura para barrena de drenaje de RYOBI™ de P4002 de alimentación.  Sostenga el cable y tire el collar hacia atr ranura en T del collar. GUIDE DE SÉLECTION DE BOUT DE Aide à pénétrer les blocages difficiles dans les drains de jusqu'à 50,80 mm (2 po)
  • 1
  • 2

Thank you for purchasing an auger tip for
your RYOBI
drain auger. More auger tips are
available at www.ryobitools.com or where you
purchased this product. Refer to the
Auger
Tip Selection Guide
for information about
which tip to choose.
NOTE:
This auger tip is compatible with the
P4002 RYOBI
drain auger only.
WARNING:
To reduce the risk of injury, do not attempt
to use this product until you have read
thoroughly and understand completely
this operator’s manual and the operator’s
manual for the P4002 RYOBI
drain auger.
Ensure compatibility and fit before using
this accessory. Do not use this accessory
if a part is damaged or missing.
INSTALLING AUGER TIPS
See Figures 1 - 2.
Remove the battery pack or power cord
from the tool.
Hold the cable and pull the collar back.
Slide the auger tip into into the cable’s
T-slot.
AUGER TIP SELECTION GUIDE
Bulb Tip
Helps clear away obstructions
and residue; used for generic
purpose cleaning in drains up
to 2 in. wide.
Grease Tip
Helps penetrate through
grease blockages in drains up
to 2 in. wide.
Spade Tip
Helps break through tough
blockages in drains up to 2 in.
wide.
Side Cutter
Helps extract grease build-up
and residue from sides of pipe
up to 2 in. wide.
Fig. 1
Fig. 2
A - P4002 drain auger (P4002 dégorgeoir pour
tuyauterie, P4002 barrena de drenaje)
B - Cable (câble, cable)
A - Cable (câble, cable)
B - T-Slot (encoche en T, ranura en T)
C - Auger tip (bout du furet, punta de la barrena)
C
B
A
A
B
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
1-800-525-2579 •
www.ryobitools.com
Push the collar forward so that the tip is
secured properly. Check to see that the
tip is secure.
To remove an auger tip:
Remove the battery pack or power cord
from the tool.
Hold the cable and pull the collar back.
Remove the auger tip by sliding it out of
the T-slot in the collar.
995000493
12-8-17 (REV:01)