Ryobi P4002 Operation Manual 2 - Page 1

Thank you for purchasing an auger tip for your RYOBI™ drain auger. More auger tips are available at www.ryobitools.com or where you purchased this product. Refer to the Auger Tip Selection Guide for information about which tip to choose. NOTE: This auger tip is compatible with the P4002 RYOBI™ drain auger only. WARNING: To reduce the risk of injury, do not attempt to use this product until you have read thoroughly and understand completely this operator's manual and the operator's manual for the P4002 RYOBI™ drain auger. Ensure compatibility and fit before using this accessory. Do not use this accessory if a part is damaged or missing. INSTALLING AUGER TIPS See Figures 1 - 2.  Remove the battery pack or power cord from the tool.  Hold the cable and pull the collar back.  Slide the auger tip into into the cable's T-slot.  Push the collar forward so that the tip is secured properly. Check to see that the tip is secure. To remove an auger tip:  Remove the battery pack or power cord from the tool.  Hold the cable and pull the collar back.  Remove the auger tip by sliding it out of the T-slot in the collar. AUGER TIP SELECTION GUIDE Bulb Tip Helps clear away obstructions and residue; used for generic purpose cleaning in drains up to 2 in. wide. Grease Tip Helps penetrate through grease blockages in drains up to 2 in. wide. Spade Tip Helps break through tough blockages in drains up to 2 in. wide. Side Cutter Helps extract grease build-up and residue from sides of pipe up to 2 in. wide. ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 1-800-525-2579 • www.ryobitools.com Fig. 1 A B A - P4002 drain auger (P4002 dégorgeoir pour tuyauterie, P4002 barrena de drenaje) B - Cable (câble, cable) Fig. 2 A B C A - Cable (câble, cable) B - T-Slot (encoche en T, ranura en T) C - Auger tip (bout du furet, punta de la barrena) 995000493 12-8-17 (REV:01)