Ryobi P430G User Manual - Page 8
Features, Assembly
View all Ryobi P430G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
FEATURES PRODUCT SPECIFICATIONS Wheel Size 4-1/2 in. Arbor Size 5/8 in. x 11 UNC No Load Speed 11,000 r/min. (RPM) Input 120 V, AC only, 60 Hz, 5.5 Amps ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. All items listed in the Includes section must be included at the time of purchase. WARNING: Items in this Assembly section are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. In Mexico, please call 01-800-843-1111. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. INSTALLING/REPLACING GRINDING WHEEL See Figure 1, page 12. DANGER: Use ONLY Type 27 depressed center wheels (such as the one provided with this product). NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. This product is only designed for grinding and sanding. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury. TYPE 27 − OK TO USE TYPE 1 − DO NOT USE DANGER: Never attach a wood cutting or carving blade of any type to this angle grinder. It is only designed for grinding and sanding. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury. WARNING: Thoroughly inspect a new grinding wheel before you install it on the grinder. • Tap lightly around the wheel using a wooden hammer. • Listen carefully to the resulting sounds. Places with fissures or cracks will result in a different sound. Do not use a wheel containing fissures or cracks. When you install a new grinding wheel, carry out a no load revolution test of approximately one minute with the grinding wheel facing a safe direction, i.e., away from people or objects. 8 - English