Ryobi P524 Operation Manual 1 - Page 1
Ryobi P524 Manual
View all Ryobi P524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
18 VOLT BRUSHLESS JIG SAW SCIE SAUTEUSE SANS BALAIS DE 18 V SIERRA DE VAIVÉN SIN ESCOBILLAS DE 18 V P524 NOTE: These instructions supplement the VARIABLE SPEED LEVER instructions located on page 7 in your operator's manual. WARNING: This insert sheet is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user must read and understand operator's manual before using this product. All page references refer to the operator's manual. VARIABLE SPEED LEVER See Figure 1. The variable speed lever, located on the top of the tool, allows the saw to operate at different maximum speeds. The maximum speed can be adjusted before or during operation. To change the maximum speed during operation, hold the saw in a normal operating position, fully depress the switch trigger, and slide the lever forward or backwards. To change the maximum speed prior to operation, slide the lever forward or backwards, and then depress the switch trigger to operate the saw between 0 SPM and the preset maximum. ONE WORLD TECHNOLOGIES, INC. P.O. Box 1288, Anderson, SC 29622 • Phone 1-800-525-2579 États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579 www.ryobitools.com OFF Setting the variable speed lever in the OFF position will make the saw inoperable to help reduce the possibility of accidental starting when not in use. Slow speeds are ideal when minimum speed and power is required, for example, starting cuts. Medium speeds are suitable for cutting hard metals, plastics, and laminates. Maximum speeds produce best results when maximum power is required, for example, cutting wood. Soft metals such as aluminum, brass, and copper may also require high speeds. Fig. 1 A - Variable speed lever A (gâchette à vitesse variable, palanca de velocidad variable) B C B - Off position (éteindre, posición apagado) C - Increase cutting speed D (augmenter la vitesse de coupe, aumentar la velocidad de corte) D - Decrease cutting speed (réduire la vitesse de coupe, disminuir la velocidad de corte) 995000624 6-26-18 (REV:01)