Ryobi P530 English Manual - Page 10

ASSEMBLY ATTACHING CIRCLE CUTTER See Figure 4.  Remove Battery Pack From speed saw.  Assemble circle cutter if necessary. Refer to "Assembling Circle Cutter."  Remove bit if necessary. Refer to "Inserting/Removing Bits" in this manual.  Place adaptor under depth adjustment ring. NOTE: Make sure the adaptor fits snugly.  Place circle cutter arm on top of depth adjustment ring.  Screw threaded ring onto adaptor, securing circle cutter arm.  Insert bit. Refer to "Inserting/Removing Bits" in this manual. THREADED RING DEPTH ADJUSTMENT RING ADAPTOR CIRCLE CUTTER ARM Fig. 4 OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this tool for the following purposes: NOTE: Most of these applications require different types of bits. Be sure to use the right bit for your tool.  Cutting electrical outlet openings in drywall or wood pan- eling. It is recommended to use a 1/8 in. bit for cutting wood paneling.  Creating decorative wood accents  Cutting tile CAUTION: To prevent damage to the battery pack, remove the battery pack from the charger immediately if no LED comes on. Return the battery pack and charger to your nearest service center for checking or replacing. Also, if you are removing the battery pack from the charger and no LEDs are on, return both the battery pack and the charger to your nearest service center. Do not insert another battery pack into the charger. A damaged charger may damage a battery pack. 10