Ryobi P631K Operation Manual - Page 8
Operation - sprayer parts
View all Ryobi P631K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. To remove: Depress the latches on both sides of the battery pack to release the battery pack and remove it from the tool. WARNING: WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side. Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purpose listed below: Interior and exterior painting and staining of decks, outdoor furniture, fences, and walls This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator's Manuals for your Ryobi One+ battery pack and charger models. BATTERY PROTECTION FEATURES Ryobi lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life. WARNING: Risk of fire or explosion. Spray area must be wellventilated and away from sparks or flames. filling sprayer with paint/stain See Figures 3 - 4, page 12. Remove and discard any skin that has formed on top of the paint or stain, then thoroughly mix the material in its original container before beginning. NOTE: Older containers of stain and paint may need to be strained before use. Remove the battery pack from the sprayer. Remove the quick-lock container by twisting counter- clockwise so that the arrow on the container lines up with the "unlock" symbol on the lid. Fill the container with paint or stain as desired. Do not fill above the max fill mark on the container. Reinstall the container on the sprayer and twist clockwise so that the arrow on the container lines up with the "lock" symbol on the lid. selecting the proper spray tip See Figure 5, page 13. If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged. Use the 1 in. round fan tip for latex paints and stains. This tip sprays in a round pattern. TO INSTALL/remove BATTERY PACK See Figure 2, page 12. WARNING: Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. To install: Place the battery pack in the tool. Align the raised rib on the battery pack with groove in the battery port. Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the tool before beginning operation. Use the 12 in. wide fan tip for latex paints, oil-based paints, and stains. This tip sprays in a wide pattern that can be adjusted from horizontal to vertical. To switch tips: Remove the battery pack from the sprayer. Remove the installed tip by turning it counter- clockwise. Install the desired tip and rotate clockwise to tighten securely. NOTE: The tip should be tightened securely by hand. A too loose or overtightened tip may cause the sprayer to leak or be damaged. 8 - English