Ryobi P7181K Operation Manual 1 - Page 1
Ryobi P7181K Manual
View all Ryobi P7181K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
STICK VACUUM WITH ROLLER BAR P7181/P726 NOTE: These instructions supplement the REMOVING THE ROLLER BRUSH FOR CLEANING instructions in your operator's manual. For complete assembly instructions, refer to page 6 of the Operator's Manual. WARNING: This insert sheet is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user must read and understand operator's manual before using this product. Your vacuum cleaner comes with a general purpose roller brush preinstalled and a replacement roller brush designed to clean high pile carpets only. Follow these steps to clean or replace a roller brush: 1. Remove battery pack and allow roller brush to STOP. Remove the roller bar assembly. 2. Rotate the end cap counterclockwise to unlock and remove the roller brush. 3. Clean the roller brush. Cut any threads or hair wrapped around the roller brush. For peak performance, routinely clean the roller brush. 4. Install either roller brush. Rotate the end cap clockwise to lock in place. Fig. 1 B Fig. 2 D A C A - Roller bar (barre à rouleau, barra giratoria) B - End cap (capuchon d'extrémité, tapa del extremo) C - Roller brush (general purpose) [brosse à tapis (pour le but général), cepillo giratorio (para usos generales)] D - Roller brush (for high pile carpets only)[brosse à tapis (pour les tapis à poils longs seulement), cepillo giratorio (solo para alfombras de tejido largo)] A B A - Tangled threads and hair (fils et cheveux emmêlés, hilo y pelo enredados) B - Roller brush (general purpose)[brosse à tapis (pour le but général), cepillo giratorio (para usos generales)] ONE WORLD TECHNOLOGIES, INC. P.O. Box 1288, Anderson, SC 29622 1-800-525-2579 • www.ryobitools.com 998000341 8-7-20 (REV:01)