Ryobi P731 Manual 1 - Page 8
Operation - battery
View all Ryobi P731 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: Do not leave items to be inflated unattended while inflator is in use. These items can burst and could cause serious injury. CAUTION: The inflator is not designed for continuous use. For every ten minutes of inflator use, ten minutes of cool down time are required. WARNING: Since the pressure gauge is not calibrated, and is therefore not binding for exact values, tire pressure must be checked using a reliable measuring device before driving a vehicle with vehicle tires inflated with the inflator. Driving a vehicle with improperly inflated tires could result in serious injury. CAUTION: The inflator is capable of inflating to 150 PSI, 10.3 BAR, or 1030 kPa. To avoid over inflation, carefully follow instructions on items to be inflated. To avoid product damage, never exceed recommended pressures. APPLICATIONS You may use this inflator for the purpose listed below: Inflating high pressure items like motorcycle, car, and bicycle tires Inflating and deflating low pressure items like air mat- tresses, rafts and floats NOTE: The inflator is not designed for commercial application. This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator's Manuals for your Ryobi One+ battery pack and charger models. BATTERY PROTECTION FEATURES Ryobi lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life. If the product stops during use, the battery needs to be recharged. TO INSTALL/REMOVE BATTERY PACK See Figure 2, page 12. WARNING: Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. To install: Place the battery pack in the tool. Align the raised rib on the battery pack with groove in the battery port. Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the tool before beginning operation. To remove: Depress the latches on both sides of the battery pack to release the battery pack and remove it from the tool. WARNING: Improperly attached hoses or accessories can become detached under pressure and cause serious injury. Possible air leaks can cause faulty pressure readings. Make sure all connections are tightly secured. 8 - English