Ryobi P750 Manual 1 - Page 6

ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. All items listed in the Includes section must be included at the time of purchase. WARNING: Items in this Assembly section are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. ASSEMBLE PUMP TO THE BASE See Figure 1, page 10.  Align the tabs on the bottom of the pump with the slots on the pump base.  Slide the pump body onto the base until it clicks into place. ASSEMBLE INTAKE FILTER AND HOSE See Figures 2-3, page 10.  Attach a discharge hose or standard garden hose (not included) to the water outlet side of the pump.  Attach the intake hose to the intake filter.  Add two drops of oil into the water inlet before and after each use.  Add water to the water inlet side of the pump to prime the impeller.  Attach the other end of the intake hose to the water inlet side of the pump. NOTE: Do not turn pump on without both intake and outlet hoses securely connected. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. 6 - English