Ryobi P795 Operation Manual - Page 7

OPERATION MOUNTING THE CCT LIGHT See Figures 6 - 7, page 9. WARNING: Only hang or mount CCT light in an area where no electrical wires, utility cables, pipes, or other obstructions are located. Contact your local utility company or a qualified electrician if you are unsure. Do not hang light from any electrical power cord. Ensure light is securely installed to prevent falling object hazard. Failure to follow these instructions can result in electrocution, electrical shock, or other serious personal injury. The light can be mounted to fit the application and work environment. It may be used as a freestanding unit by placing the light on its base on a flat surface. NOTE: Be careful not to mount or hang the light in such a way that it prevents normal operation or damages the cord. Mounting holes: Hang or mount the light from a sturdy location using screws. The mounting holes are designed for slide-mounting the base of the light onto the screws. Center distance between the holes is 2-1/2 in. Tripod mount: The light may be mounted onto a tripod using the 1/4-20 insert in the base plate of the light. Screw the tripod into the hole on the base of the light. NOTE: An adaptor is included with this product for compatibility with HUSKY brand tripods. MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. NOTICE: The LEDs cannot be replaced. Any attempt to replace the LEDs may damage the light. STORAGE Store indoors in a dry, locked-up place, out of the reach of children, with the battery pack removed and power cord disconnected. Keep away from corrosive agents such as garden chemicals and de-icing salts. NOTE: ILLUSTRATIONS BEGIN ON PAGE 8 FOLLOWING FRENCH AND SPANISH LANGUAGE SECTIONS. 7 - English