Ryobi PWV200B Operation Manual - Page 8

MAINTENANCE Liquid waste:  Remove the battery pack. n Unlock the locking latches and remove the motor head assembly.  Remove the filter cover.  Remove and clean the wet use filter. Allow the filter to completely dry before reattaching. NOTE: Replace the filter if it is worn or damaged.  Empty the canister; wash out if necessary. Before replacing the motor head assembly, make sure all pieces are completely dry. n Replace motor head assembly and lock securely. CAUTION: Do not allow liquid pick up to remain in the canister for extended periods of time. Moisture can develop in the motor compartment and shorten the life of the motor. CAUTION: Do not turn unit upside down, as liquid may enter the motor unit. STORAGE See Figures 16 - 17, page 11. n Clean all foreign material from the wet/dry vac. n Clean the outside of the canister with warm water and mild soap. n Empty and clean the canister, flexible hose, wands, and attachments with warm water and mild soap and allow to completely dry before storage. n Store flexible hose and attachments inside the canister or in the storage areas located on the motor head and canister. NOTE: To attach the storage wand with clip to the canister, place the wand onto the clip holder and slide it down to secure it in place. n The canister should be disinfected as needed and before prolonged storage. n Store indoors in a place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. ACCESSORIES Look for these accessories where you purchased this product or call 1-800-525-2579:  Dry Use Filter...019071004011  Wet Use Filter...019071004010 NOTE: ILLUSTRATIONS START ON PAGE 9 AFTER FRENCH AND SPANISH LANGUAGE SECTIONS. 8 - English