Ryobi RE180PL English Manual - Page 6
Specifications, Unpacking, Applications - router
View all Ryobi RE180PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Plunge Depth Collet Adaptor Peak Horsepower Input No Load Speed Power Cord Net Weight SPECIFICATIONS 0 - 2 in. (0 - 5.08 cm) 1/2 in. (12.7 mm) 1/4 in. (6.35 mm) 2 120 Volts, 60 Hz, AC Only, 10.0 Amperes 15,000 - 23,000 RPM 10 ft. (3 m) 8.5 lbs. (3.86 kg.) UNPACKING INSTRUCTIONS Your router has been shipped completely assembled. ■ Carefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are included. ■ Inspect the tool carefully to make sure no breakage or damage occurred during shipping. ■ Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. ■ If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Plunge Router Collet Adaptor 15/16 in. (23.8 mm) Wrench 5/16-18 UNC-2A Flathead Screws (2) Operator's Manual NOTE: The screws and the optional depth control knob must be used when mounting your router to a router table. They are the only screws that will secure your router to a router table properly. WARNING: If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. APPLICATIONS Use your router only for the purposes listed below: ■ Routing grooves, shaping edges, freehand designs, etc. in wood. ■ Chamfering, rabbeting, dadoing, and dovetailing in wood. ■ Routing edges on laminates. 6