Ryobi RY141820 Operation Manual - Page 18
Maintenance
View all Ryobi RY141820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
MAINTENANCE n Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure. n Unplug the pressure washer. n Remove the nozzle from the spray wand. WARNING: NEVER remove nozzles without first turning off the motor, relieving the water pressure in the trigger handle, and locking the lock out on the trigger handle. NEVER point the nozzle at your face or at others. The quick-connect feature contains small springs that could eject the nozzle with some force. Failure to follow these instructions could result in an eye injury or other serious personal injury. n To free any foreign materials clogging or restricting the nozzle, blow out or remove debris with a straightened paper clip or fine needle (not included). n Using a garden hose, flush debris out of nozzle by back flushing (running the water through the nozzle backwards or from the outside to the inside). n Reconnect the nozzle to the spray wand. n Reinstall the garden hose and connect the unit to the power supply. PUMP MAINTENANCE Routinely make a visual inspection of the pump. If you notice any leaking of lubricant around the pump seals, take the pressure washer to an authorized service center for repair. There are no user serviceable parts to the pressure washer pump. Any attempt to service or alter the pump may damage the pressure washer and void your product warranty. STORING THE PRESSURE WASHER See Figures 16 - 17. NOTE: Regular use of pump protector will give you better performance of the unit and increase the life of the pump. Store in a dry, covered area where the weather can't damage it. It is important to store this product in a frost-free area. Always empty water from all hoses and the pump before storing. n Make sure the on/off switch is in the OFF position. n Unplug the pressure washer and store the power cord using the hook-and-loop strap. n Disconnect both the high pressure hose and the garden hose from the pump. n Neatly coil the high pressure hose and store with hook- and-loop strap. n Tilt the unit as shown to allow any remaining water in the pump to drain from the water outlet. NOTICE: If the location where your pressure washer is stored will fall below 32°F, the use of a pump protector is required before storing to prevent freeze damage. Freeze damage will void your warranty. n Turn the spray wand counterclockwise to remove it from the trigger handle. Store the unassembled spray wand and trigger handle in their storage areas. n Store the unit and accessories in an area that does not reach freezing temperatures. Do not store near furnace or other sources of heat that could dry out the pump seals. This product has a Three-year Limited Warranty for personal, family, or household use (90 days for business or commercial use). For warranty details, visit www.ryobitools.com or call (toll free) 1-800-860-4050. 14 - English