Ryobi RY24610 User Manual - Page 11
Make The Most Of Your Purchase
![]() |
View all Ryobi RY24610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
MAINTENANCE BLADE CARE Lubricate the cutting blade after each use. Periodically inspect the blade for damage and wear. If it becomes necessary to have the blade replaced, take the hedge trimmer to an authorized service center. LUBRICATING THE BLADE See Figure 6. For easier operation and longer blade life, lubricate the blade before and after each use. Lay hedge trimmer on a flat surface. Use a brush to remove debris or clippings from the blade. Wipe any remaining debris away with a clean cloth. Apply light weight machine oil along the edge of the top blade. Wipe any excess oil from the blade. Occasionally, you should oil the hedge trimmer during use. Before oiling, stop the hedge trimmer, remove the attachment, then oil. You can then resume trimming. Do not oil while hedge trimmer is running. ATTACHING THE STORAGE HANGER See Figure 7. There are two ways to hang the attachment for storage. To use the hanger cap, push in the button and place the hanger cap over the end of the attachment shaft. Slightly rotate the cap from side to side until the button locks into place. The secondary hole in the attachment shaft can be used for hanging purposes as well. STORING THE ATTACHMENT Clean the attachment thoroughly and lubricate before storing. Store the attachment indoors in a dry, well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. Always place the scabbard on the cutting blade before storing or when the attachment is not in use. MAKE THE MOST OF YOUR PURCHASE! Go to www.ryobitools.com and register your new tool on-line. Your product has been fully tested prior to shipment to ensure your complete satisfaction. For any questions about operating or maintaining your product, call the Ryobi Help Line! To register your Ryobi product by regular mail, please print the following information on a 3 in. x 5 in. card or standard postcard: your name, mailing address, phone numbers, email address, Ryobi product(s) purchased with item number from package, and serial number for each product. Mail the card to: Techtronic Industries North America, Inc., Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson, SC 29625. To receive information on our company and products, please include the following statement on your registration card: "Send me information on your products and company using the contact information I am providing with this product registration." 9 - English
![](/manual_guide/products/ryobi-ry24610-user-manual-ed90142/11.png)