Ryobi RY31012 Operation Manual

12 in. Surface Cleaner Attachment

RY31012/RY31012VN/RY31012VNM

WARNING:

To reduce the risk of injury, user must read and understand the

operator’s manual for their pressure washer before using this

accessory. To reduce the risk of injury or property damage,

spray the pressure stream in a safe direction to ensure proper

connection of all accessories before starting any cleaning proj-

ect. Only use on pressure washers operating at up to 2,300 psi

with a maximum flow rate of 1.4 gpm. Ensure compatibility

and proper fit before using this

accessory. Wear eye protection

with side shields marked to comply with ANSI Z87.1. Risk of

fluid injections; do not point at people, pets, electrical devices

or the unit itself. Turn off the pressure washer, relieve the water

pressure in the trigger handle, and lock the lock out on the

trigger handle (if one is included with your pressure washer)

before installing, changing, or adjusting accessories. For cold

water use only. For outdoor use only – store indoors. Save

these instructions. Refer to them frequently and use them to

instruct other users. If you loan someone this tool, loan them

these instructions also.

PRODUCT SPECIFICATIONS

Connections

.....................................

1/4 in. Quick Connect Plug

Deck Width

.........................................................................

12 in.

Maximum Pressure

..............................................

up to 2,300 psi

Maximum Water Flow

....................................................

1.4 gpm

Maximum Inlet Water Temperature

...................................

140°F

INSTALLING THE SURFACE CLEANER ON

THE SPRAY WAND

See Figure 1.

n

Pull back the quick-connect collar on the pressure washer

spray wand.

n

Insert the surface cleaner inlet plug into the spray wand quick

connect coupler.

n

Push the collar forward so that the surface cleaner inlet plug is

secured properly. Check to see that the connection is secure.

WARNING:

To reduce the risk of injection or injury, only use the surface

cleaner on flat, horizontal surfaces. Never lift the surface

cleaner from the cleaning surface while operating the pres-

sure washer.

USING THE SURFACE CLEANER

See Figure 2.

WARNING:

Do not reach hands or feet under cleaning deck. Contact with

the spinning nozzles or spray bar can result in a fluid injection

or other serious personal injury.

Fig. 1

INLET

PLUG

QUICK CONNECT

COUPLER

Fig. 2

n

Once the surface cleaner is installed, connect the hose to the

pressure washer as described in your pressure washer manual.

n

Start the pressure washer as described in your pressure

washer manual.

n

Walk slowly behind the cleaning deck, cleaning as you go.

NOTE:

If striping or swirling occurs, slow your pace. If strip-

ing or swirling continues, the surface cleaner nozzle(s) may

be clogged. See

Nozzle Maintenance

for how to clean the

nozzles.

Ryobi RY31012 Operation Manual

Ryobi RY31012 Manual

Ryobi RY31012 manual content summary: