Ryobi RY40410A User Manual - Page 8

FEATURES KNOW YOUR BLOWER ATTACHMENT See Figure 1. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all o­ perating features and safety rules. PRODUCT SPECIFICATIONS Weight 4 lbs. Air Velocity: MPH 150 CFM 279 ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the items from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Ryobi® Expand-It™ Blower Attachment Blower Attachment Shaft Attachment Securing Cap Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not connect to power head until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. JOINING THE BLOWER ATTACHMENT TO THE ATTACHMENT SHAFT See Figure 2. Use the attachment securing cap for the one-time assembly of the blower attachment to the attachment shaft.  Install the attachment securing cap over the end of the attachment shaft as shown.  Align the raised tabs inside the opening on the blower housing with the positioning holes on the attachment shaft. Insert the end of the attachment shaft into the opening on the blower housing and rotate slightly until the tabs lock into the positioning holes.  Rotate the attachment securing cap clockwise until the shaft is completely secure. NOTE: When fully secure, the cap cannot be rotated counterclockwise. JOINING THE POWER HEAD TO THE BLOWER ATTACHMENT See Figure 3. WARNING: Never attach or adjust any attachment while power head is running. Failure to stop the engine or motor may cause serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. After assembling, install the blower attachment onto the power head using the coupler device.  Remove the spark plug wire or disconnect from the power supply.  Remove the hanger cap from the attachment shaft.  Loosen the knob on the coupler of the power head shaft. 6 - English