Ryobi RY40510 User Manual - Page 19

FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG English SPECIFICATIONS CHAIN & BAR INFORMATION Model RCS36 Rated voltage 36V DC No Load Speed 3.6 m/s Guide bar length 300 mm Chain stop < 2 s Chain oil tank capacity 110 ml Weight (with battery pack) 4.4 kg Emission sound pressure level LpA 81.2 dB(A) Uncertainty KpA 2 dB(A) Sound power level LWA 94.8 dB(A) Uncertainty KWA 2 dB(A) Guaranteed sound power level LWA(G) Vibration total value ah 97 dB(A) 2.3 m/s2 Uncertainty K 1.5 m/s2 Battery Pack 1 x BPL3626 Battery Charger 1 x BCL3620 REMARKS:  The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.  The declared vibration value may be used in a preliminary assessment of exposure. WARNING The actual vibration values during use of the tool can be different from the above stated and depend on the use of the tool; and the need to identify safety measures to protect the operator are based on an estimation of exposure in the actual conditions of use (taking account all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). RCS36 Manufacture Saw chain Guide bar Oregon 90SG045X 124MLEA041 Tri-link CL14345PB M1431245-1041HL Oregon's chain must be fitted with Oregon's bar; Trilink's chain must be fitted with Tri-link's bar. You can purchase bar and chain replacements from your Ryobi local dealer. RCS36 bar replacement: RAC226 RCS36 chain replacement: RAC227 DESCRIPTION 1. Guide bar cover 2. Front handle guard 3. Front handle 4. Safety lock-off button 5. Switch trigger 6. Oil tank cover 7. Oil level gauge 8. Spike bumpers 9. Saw chain 10. Guide bar 11. Safety tip 12. Rear handle 13. Chain tensioner adjustment knob 14. Sprocket cover 15. Sprocket cover tighten knob 16. Bolt for saw chain tension 17. Sprocket 18. Bar guide 19. Oil outlet 20. Bar groove 21. Chain drive links 22. Cutter 23. Felling direction 24. Danger zone 25. Escape route 26. Direction of fall 27. Notch 28. Felling back cut 29. Hinge 30. Limb cut 31. Keep work off ground leave support limbs until log is cut 32. Log supported along the entire length 33. Cut from top (over buck) avoid cutting earth 34. Log supported one end 35. Under buck 36. Over buck 16 RCS36-23lgs manual.indd 16 2010/12/24 3:42