Ryobi RY40860 Operation Manual - Page 1

OPERATOR'S MANUAL 40 V LITHIUM-ION BATTERY PACK OP4015 / OP4026 / OP40201 / OP40261 / OP4030 / OP40301 / OP4040 / OP40401 / OP4050 / OP40501 / OP40601 To register your RYOBI product, please visit: http://register.ryobitools.com Use this battery pack for RYOBI 40 V cordless products only. Refer to the Operator's Manual provided with product. Always mention the model number above when communicating with us regarding this battery pack. SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.  Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.  Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.  Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.  Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.  Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock.  Do not use, store, or charge battery packs in locations where the temperature is less than 50°F or more than 100°F. Do not store outside or in vehicles.  Charge only with RYOBI 40 V lithium-ion battery chargers. Use of other chargers may result in personal injury, fire, or damage.  Do not charge battery in an area of extreme heat or cold. It will work best at normal room temperature.  Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.  When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire and can lead to personal injury or property damage.  Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.  Always remove battery pack before storing the device.  When battery becomes fully charged, unplug the charger from the power supply and remove the battery pack from the charger.  Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.  Keep battery pack dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents to clean battery pack.  Do not use a battery pack that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.  Do not modify or attempt to repair a battery pack that has been damaged.  Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may cause explosion.  Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.  Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. OPERATION LITHIUM-ION BATTERY PACKS Lithium-ion batteries deliver fade free power for their entire run time. Lithium-ion tools will not gradually lose power due to decreasing battery charge. Instead, power from the battery pack will drop from full to zero once the full charge has been drained from the battery. Once this happens, recharging of the battery is required. It is not necessary to drain the battery pack completely before recharging. BATTERY PROTECTION FEATURES Lithium-ion battery packs are designed with features that protect the lithium-ion cells and maximize battery life. If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged. COLD WEATHER OPERATION The lithium-ion battery pack can be used in temperatures down to -4°F. Put the battery pack on a tool and use the tool in a light duty application. After about a minute, the pack will warm up and begin operating normally. 1 - English