Ryobi RYAC130 Operation Manual - Page 14
Assembly
View all Ryobi RYAC130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. WARNING: If any parts are damaged or missing, do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete and you are ready to mow. Failure to comply could result in accidental starting and possible serious personal injury. WARNING: To prevent accidental starting, do not make any adjustments or installations with the power supply connected. Accidental starting of the mower during assembly could result in serious personal injury. WARNING: Never operate the mower without the proper safety devices in place and working. Never operate the mower with damaged safety devices. Operating the mower with missing or damaged parts can result in serious personal injury. PACKING LIST Lawn Mower Upper Handle Assembly Lower Handle Mulching Plug Grass Catcher Upper Handle Lock Knobs (2) Upper Handle Lock Knob Bolts (2) Operator's Manual INSTALLING AND ADJUSTING HANDLE ASSEMBLY See Figures 2 - 3. To install lower handle: Insert the ends of the lower handle into the mounting holes on the deck as shown. NOTE: Make sure to keep the cord on the inside of the handle when installing. Depress the lock button at the rear of the mounting hole to allow the handle to slide into position. NOTE: There are three height position notches that can be adjusted by depressing the lock button and raising or lowering the handle to the desired position. To install upper handle assembly: Position the upper handle as shown and insert the lock bolt through the matching holes at the bottom of the upper handle and the top of the lower handle. NOTE: The lower handle has three hole settings for height adjustment. Make sure you use the same height setting for each side. Thread the upper handle lock knob onto the lock bolt. Repeat for other side. Pull up on the upper handle to raise it into operating position. Make sure that the upper handle is seated in the grooves at the top of the lower handle. 10 - English