Samsung 170MP PLUS User Manual (user Manual) (ver.1.0) (English) - Page 8
Plug and Play, Installing the Video Driver, Self-Test Feature Check STFC
View all Samsung 170MP PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4_E150MP170MPbody.fm Page 6 Wednesday, September 19, 2001 2:54 PM Setting up Your LCD Monitor Plug and Play The adoption of the new VESA® Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the flat panel display. If your PC system needs a video driver, follow the instructions given below according to the operating system your computer uses. Installing the Video Driver The CD that accompanies this product contains the necessary drivers for installing your monitor. Please refer to the driver installation instructions included with your CD package for more information. Self-Test Feature Check (STFC) Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. Make sure that PC is selected as a primary source by checking if the source indicator LED labeled "PC" is on. If your monitor and computer are properly connected but the monitor screen remains dark and the power indicator is blinking, run the monitor self-test by following the steps given below: Power Indicator Figure 4. Power Indicator 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer. 3 Turn on the monitor. English 6