Samsung 275T User Manual (user Manual) (ver.1.0) (English) - Page 43

Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. - Available in Analog Mode Only 1) Coarse : Adjust the screen so that all vertical lines (noise) on the screen are removed. Then, use the horizontal position adjustment menu to move the screen to the center, as the screen position may change after the noise has been removed. 2) Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). 3) Sharpness : Adjust the Sharpness. - Not available in Dynamic CR Mode 4) H-Position : Adjusts the screen location horizontally. 5) V-Position : Adjusts the screen location vertically. MENU , , , , Auto Adjustment The values of Fine, Coarse, position are adjusted automatically. By changing the resolution in the control panel, auto function is performed. - Available in Analog Mode Only MENU , , Size You can switch the Size. 1) Wide 2) 4:3 MENU , , , PIP Picture When the PIP is on, you can adjust the PIP screen setting. 1) Contrast : Adjusts the Contrast of the PIP window on the screen. 2) Brightness : Adjusts the Brightness of the PIP window on the screen. 3) Sharpness : Adjusts the Sharpness of the PIP window on the screen 4) Color : Adjusts the Color of the PIP window on the screen 5) Tint : Adds a natural tone to the PIP window. - Available in AV/S-Video Mode Only MENU , , , , Coarse Fine Sharpness H-Position V-Position Contrast Bightness Sharpness Color Tint Picture (Digital : Digital DVD/AV/S-Video/Component)