Samsung 460DX-2 User Manual (ENGLISH) - Page 23
Connecting to a Camcorder, Connecting the BNC to BNC cable
![]() |
UPC - 729507810089
View all Samsung 460DX-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting to a Camcorder Connections 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display . 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display . 3. Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control. 4. Then, start the Camcorder with a tape inserted. Note The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting the BNC to BNC cable 1. Connect the BNC/COMPONENT IN [R/Y, G/PB, B/PR] ports on the monitor to the BNC port on the external device using the BNC to BNC cable.
![](/manual_guide/products/samsung-460dx2-user-manual-english-0f0880a/23.png)