Samsung 700T User Manual (user Manual) (ver.1.0) (English) - Page 8

English ! Set up your digital frame 700T can be used by connecting to a PC via the USB cable (along with the auxiliary power 7 cable). However, it may not operate properly if the power supply in your PC is unstable. In this case, connect the power adapter. USB Cable Auxiliary power cable Screw the digital frame stand until it is fixed completely to the frame. Using the Digital Frame Viewing pictures Pictures saved in the product's internal memory or an external memory device can be viewed in a wide range of options. Only an SD memory card or USB memory device can be used as an external memory device. Refer to the following page for menu options. Press [ ]. Use to move to the picture you want and press [ ]. A slide show begins from the picture you selected. If you press the [ ] button during a slide show, the , , and menus will appear. • T o use , must be set as , or . • T o use , must be set as or . Using as a Mini Monitor Connect the digital frame to a PC with the USB cable to use as a Mini Monitor. Connect the digital frame to a PC with the USB cable to use as a Mini Monitor (aux. monitor). You must install Frame Manager on your PC in order to use the product as a Mini Monitor. Log on to http://samsung.com/ to download Frame Manager and for instructions on using the product as a Mini Monitor. Only one auxiliary monitor can be used at a time. * The buttons on the digital photo frame are disabled (in Mass Storage or Mini Monitor mode) when connected to a PC. ! PC requirements for use as a Mini Monitor • OS: Windows XP SP2, Vista • USB: Extended Host Controller(EHCT) USB 2.0 supported • RAM: 256MB or higher • CPU: 2.4GHz or higher