Samsung AW25ECB8 User Manual (user Manual) (ver.1.0) (English) - Page 13

Selecting Operation Mode

Page 13 highlights

operating your air conditioner SELECTING operation MODE Dry If the atmosphere in your room is very humid or damp,you can remove excess humidity without lowering the room temperature too much. 1. Turn on the air conditioner. Press the Power button on the remote control. You will hear two short beeps and the air conditioner will turn on. 2. Set the operating mode. Press the Dry button on the remote control to select Dry mode. icon will appear on the display. 3. Set the temperature. Press the Temp button on the remote control. Press  or  button to increase or decrease the desired temperature. You can set the desired temperature within the range of 64˚F~ 86˚F in Cool mode. You can increase/decrease the temperature in 1˚F units. • When you are using the remote control, make sure corresponding icon appears on the display. • Air flow can also be adjusted manually. (See page 15 for instructions.) operating _13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

operating
_13
operating your air conditioner
SELECTING OPERATION MODE
Dry
If the atmosphere in your room is very humid or damp,you can remove excess humidity without
lowering the room temperature too much.
1.
Turn on the air conditioner.
Press the
Power
button on the remote control.
You will hear two short beeps and the air
conditioner will turn on.
2.
Set the operating mode.
Press the
Dry
button on the remote control to
select Dry mode.
icon will appear on the display.
3.
Set the temperature.
Press the
Temp
button on the remote control.
Press
or
button to increase or decrease the
desired temperature.
You can set the desired temperature within the
range of 64˚F~ 86˚F in Cool mode.
You can increase/decrease the temperature in 1˚F units.
When you are using the remote control, make sure corresponding icon appears on the
display.
Air flow can also be adjusted manually. (See page 15 for instructions.)