Samsung BD P3600 User Manual (ENGLISH) - Page 26
Connecting to a TV (Video) - GOOD QUALITY, Turn on the Blu-ray Disc Player and TV. - remote control
![]() |
UPC - 036725608054
View all Samsung BD P3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
connections Connecting to a TV (Video) - GOOD QUALITY 1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV. 2. Turn on the Blu-ray Disc Player and TV. 3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen. ~ If you have set the remote control to operate your TV (see pages 20~21), press the TV SOURCE button on the remote control and select VIDEO as the external source of the TV. Audio/Video cable Red White Yellow M ` Noise may be generated if the audio cable is placed too close to the power cable. ` If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 27~30) ` The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV. ` If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the Blu-ray Disc Player. ` The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu. (See page 45) J ` Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television. 26_ connections
![](/manual_guide/products/samsung-bd-p3600-user-manual-english-0f0b7ff/26.png)