Samsung CL-17M2MQ User Manual (user Manual) (ver.1.0) (English) - Page 9
INSTALLATION, Connecting VHF and UHF Antennas, Antennas with 300-ohm Flat Twin Leads
View all Samsung CL-17M2MQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
C h a p t e r Tw o INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see "Antennas with 300-ohm Flat Twin Leads" below. If your antenna has one lead that looks like this, see "Antennas with 75-ohm Round Leads" on next page. If you have two antennas, see "Separate VHF and UHF Antennas" on next page. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300-ohm twin flat leads, follow the directions below. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel. ANT IN 9