Samsung CL-25M6W User Manual (user Manual) (ver.1.0) (English) - Page 19
Connecting an S-VHS VCR
View all Samsung CL-25M6W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
INSTALLATION Connecting an S-VHS VCR (CL21M6W/CL25M6W/CL29M6W/CL29M9WCL29V5W/CL29M5W) Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1-3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 2 AUDIO INPUT jacks on the TV. Make sure the jacks you are using are underneath the number "2". 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV. An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.) 2.6 CHAPTER TWO: INSTALLATION